|Shell Material||Aluminum Alloy|
|Voltage||100 – 240V|
|Product Size||1159 x 415 x 71mm (45.6 x 16.3 x 2.79in)|
|LEDs||560 * 3W or 560 * 5W Dual chip|
|Lens Beam Angle||30 Degree|
|Wavelengths||Two of 660nm + 850nm
Five of 630nm + 660nm + 810nm + 830nm + 850nm
|Irradiance||146mW/cm² at 6 inches;
129mW/cm² at 12 inches;
116mW/cm² at 18 inches;
98mW/cm² at 24 inches.
|Timer (6 Levels)||5 / 10 / 15 / 20 / 25 / 30 Minutes|
|Dimmer (5 Levels)||20% / 40% / 60% / 80% / 100%|
|Pulse Frequency ((6 Levels)||10 / 40 / 73 / 146 / 293 / 587Hz|
|Cooling Fan Quantity||4|
|Life Span||> 50,000 Hours|
1. ALUMINUM ALLOY BODY. 1) High resistance to corrosion than common iron frame. 2) One of the most recyclable and environmentally friendly materials than plastic housing. 3) Heat-dissipation ability is better than caron steel and plastic materials. 4) Advanced texture.
2. EXTREMELY THIN FRAME. Robust construction with specially managed materials.
3. ACRYLIC PANEL (PATENT). Heat-resistant, dust-proof and patent design to protect the lens and lamp beads.
4. SMOOTH ROUNDED CORNERS. More aesthetic and friendly to use.
5. COOLING TECHNOLOGY (PATENT). Over-heating is harmful to lamps. Based on our patent heat dissipation system, every lamp bead is well protected from low temperatures. Endurable for continuous use.
6. NO SIDE HOLES. Neat design especially when it was hanged up in a horizontal position. Long named and big customized logo are available on the side. All vents for air circulation are in the rear.
7. NO PROTRUDING SCREWS. Protect you adequately.
8. FROSTED SURFACE FINISHING. Better resistance to scratch.
9. EXCELLENT WATER-PROOF POWER SUPPLY. Pretty stable performance to support the entire versatile control system.
10. ALL WIRES CORRESPOND TO AWG. Strict quality is required.
Cascade Design (Patent)
- Support the connection with one more panel.
- Only one power cord is required.
- Connect the two panels with the signal cable.
- Any one of the remotes can be used to control the therapy program.
- The control board of each panel can be used to control the corresponding panel for particular needs.
- Long-press the “R/NIR” buttons of other remote controllers for 5s to close their remote function, again to open the function. Indeed, the operation is not required, if the other remote is well retained and will not impact your control.
Irradiance and Coverage
Easy-to-use by Control Panel or Remote Control
After connecting the power and turning on the power switch on the lower back. You can click the buttons on the control panel or remote controller to set up the light, time, brightness and pulse frequency for light therapy.
Light Mode Selection
Click the light button, 3 light modes can be switched: Red + NIR (1st) -> Red (2nd) -> NIR (3rd).
4th press for off.
5th press for another light mode selection cycle, Red + NIR (5th) -> Red (6th) -> NIR (7th).
- When red light + NIR mode is selected, “RED” and “NIR” indicators lighten in green simultaneously;
- When red light mode is selected, the “RED” indicator lightens in green;
- When near infrared (NIR) light mode is selected, the “NIR” indicator lightens in green.
Click the timer button, 5 -> 10 -> 15 -> 20 -> 25 -> 30 minutes can be selected, it will begin to count down in 0.3s.
Press it for over 1s to halt the count down process, and press again for a continuation for the unfinished time.
Click the dimmer button, 5 levels of brightness can be switched to choose: 20% -> 40% -> 60% -> 80% -> 100%.
Click the pulse button, 6 levels of pulse frequencies can be switched respectively: 10 -> 40 -> 73 -> 146 -> 293 -> 587Hz.
Red Light Therapy Effects
Red light acts on the “power plant” in your body’s cells called mitochondria, they can absorb light wavelengths and are stimulated to work with other cells more efficiently, then improves skin appearance, enhances collagen production, smoothes tiny wrinkles and fine lines, reduces acne and scars. boosting new cell growth and enhancing skin rejuvenation.
Infrared light waves are invisible to the human eye, with “near-infrared” wavelengths ranging from around 760nm to approximately 1,500nm. They have more penetrating power and can penetrate deeply into the subcutaneous tissues. Unlike the traditional warm methods, infrared rays generate radiant heat from inside, mimic natural sunlight, and increase the temperature faster. After the subcutaneous tissue temperature rises, the tiny blood vessels open, the blood flow speeds up and tissue metabolism promotes. Then enhance the cells activation, facilitate excess fat consumption, reduce pain associated with joints and muscles, alleviate inflammation, improve sleep quality, relieve fatigue and boost mood, etc.
Conveniently Use with Complimentary Wall Hanging Kit
1) Acrylic Base (Optional)
Inexpensive for steady stand. You can make a selection before adding to cart.
2) Manual Mobile Stand
Easy to move, support vertical and horizontal fixing. Order one via Red Light Therapy Stand
3) Motor-driven Mobile Stand
The most convenient stand, can be swivelled 360 degrees with adjustable height. Order one via Electric Mobile Stand for Red Light Panel
Three Lamp Beads for Option
One: 3W Two-Waveband
1) 660nm red light, which is deep-red, 280 LEDs.
2) 850nm NIR, which is invisible by human eyes, 280 LEDs.Two: 3W Five-Waveband (Extra three beneficial wavelengths)
1) 630nm red light was emitted by 56 LEDs.
2) 660nm red light was emitted by 224 LEDs.
3) 810nm NIR was emitted by 32 LEDs.
4) 830nm NIR was emitted by 24 LEDs.
5) 850nm NIR was emitted by 224 LEDs.
Three: 5W Two-Waveband (Two-in-one for more well-proportioned photon distribution)
One LED includes two chips, one for red light, one for infrared light. So 560 LEDs have 1120 chips to generate light.
1) 660nm red light was generated by 560 Chips.
2) 850nm NIR was generated by 560 Chips.
1 x Light Therapy Device
1 x Remote
1 x Power Cord (Follow your country standard)
1 x Wall Hanging Kit
1 x Goggles
1 x Acrylic Base (Optional)
Manual Mobile Stand can be ordered through the link Red Light Therapy Stand
Motor-driven Mobile Stand can be ordered through the link Electric Mobile Stand for Red Light Panel
Note: If your order quantity for the lamp is two, we will provide you with a signal cable for free.
Session：10 – 20 minutes for the same area in one session. It is better to start with a shorter session if you never use light therapy.
Frequency: 1 – 2 times a day for the same area treatment. Keep minimum 6 hours interval for the 2nd treatment for the same area.
Distance: Expose your skin and keep a distance at 6 – 24 inches from the device for best results.
Protect your eyes: Please wear goggles when enjoying the light therapy.
Tips: Drink some water before and during use.
NOT USE UNDER THESE CONDITIONS
Children under the age of 13, pregnancy and epilepsy, photo-allergy, and photosensitizing medications like lithium, melatonin, phenothiazine antipsychotics, and certain antibiotics.
People with a history of skin cancer, insensitive to heat, and systemic lupus erythematosus should also avoid this kind of treatment.
Besides, if you are currently taking steroids or cortisone injections, you should not receive light therapy.
1. One treatment session for the same area should not exceed 30 minutes.
2. Turn off all power after finishing treatment, pull plugs off when not in use.
3. Do not use the device in the circumstances of hot, humid, dusty or have lampblack in the environment.
4. Keep your device away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.
5. Keep your device in a cool, dry, well-ventilated location without corrosive gas.
6. Prevent impact or violent vibration, move it gently.
7. Avoiding alcohol or corrosive solvent to clean all parts of the device.
Turn off the power of your device first, and then unplug the power cord. Then use a light damp, soft, lint-free cloth to clean exterior. Do not spray liquid directly.
All panels of Infrared Red Light (IRL) purchased new from IRL directly or an authorized reseller are warranted for a period of three years from the date of shipment from the factory. IRL will be responsible for the faults of the products caused by the normal using during the warranty period, repair or replace the corresponding component found to be defective at no charge to the purchaser.
IRL shall not be liable for any faults or damage caused by misuse, accidental or intentional damage, force majeure, or the product has been modified.
There are no reviews yet.