Product Specifications
Shell Material | Aluminum Alloy |
Voltage | 100-240V |
Power Consumption | 91W |
Product Size | 322 x 216 x 71mm (12.67 x 8.5 x 2.79in) |
Net Weight | 4.2kg |
LEDs | 70pcs |
Lens Beam Angle | 30 Degree |
Wavelengths | 480nm + 630nm + 660nm + 810nm + 830nm + 850nm + 940nm |
Irradiance | 150mW/cm² @ 6″ 125mW/cm² @ 12″ 111mW/cm² @ 18″ 87mW/cm² @ 24″ |
EMF | 0 µT @ 3″ |
Timer | 0 – 30 Minutes |
Dimmer | 0 – 100%, with separate controls for Red & NIR. |
Pulse Frequency | 0 – 10,000Hz, with separate controls for Red & NIR. |
Photon Mode | Red, NIR, Blue, Any combination |
Life Span | 100,000 Hours |
Warranty | 3 Years |
Customizable (>/=1 unit) | Wavelengths, Color, Logo, etc. |
Housing Design (Patent)
1. Full aluminum alloy sheathing. Excellent thermal dissipation and outstanding oxidation resistance, not easy to change color than normal carbon steel material.
2. One-piece aluminum alloy frame, super thin but sturdy with a rounded corner design, and all screws are at the same height as the aluminum case. Whole smooth and flat, preventing any hurt that may be caused by keen-edged corners or bumps.
3. The whole aluminum fabrication used a grit dose process to preserve it from scratch.
4. A specially designed acrylic panel was attached to the front to protect the lamps for durable use. It is heat-resistant, dust-proof, and water-proof, you can clean the surface easily.
5. Anti-skid and anti-collision rubber feet are specially designed both in the bottom and rear for good protection.
Cooling System Design (Patent)
Our professional engineers focus on the design of the cooling system to maximize the usage duration and life of the device. They have been upgraded over 10 times by improving the internal structure and external heat dissipation method. In the end, they made it come true. Our devices keep a low temperature during the process of constant use. So our customers who need to use it to treat different areas or families can operate freely and continuously without having to take a break for cooling.
The internal cooling system integrated hydrodynamic heat dissipation technology, cooling fins and a silent cooling fan were installed in the device to boost the air circulation and heat dissipation. Furthermore, we adopt honeycomb heat dissipation holes for better cooling results.
It is peaceful to enjoy your light therapy and meditation at the same time.
Strong Energy
Easy-to-use by Intelligent Touch Screen
1) Receive either red light, near infrared (NIR), blue, or any combination simultaneously.
2) The brightness can be adjusted from 0% to 100%, with separate controls for Red and NIR.
3) Pulse frequency can be selected from 0Hz to 10,000Hz, with separate controls for Red and NIR.
4) Initiate the timer function and set the duration from 0 minutes to 30 minutes.
5) Conveniently synchronize multiple panels together using our Sync function.
6) Customize and save your own default working parameters for convenient usage.
Operation Video
Red Light Therapy for Arthritis
Red light therapy, also known as photobiomodulation, utilizes specific wavelengths of light to stimulate cellular processes. It assists in managing arthritis by reducing inflammation, promoting tissue repair, and relieving pain.
Lots of users gained the benefits from the combination of red and infrared light, and gave their positive feedback about arthritis pain was alleviated significantly. Many said it is an amazing non-invasive and natural therapy method.
Arthritis’ characterized by inflammation and deterioration of joint tissues, leading to pain, stiffness, and reduced mobility. The two most prevalent types are osteoarthritis, which results from the natural wear and tear of joints over time, and rheumatoid arthritis, an autoimmune disorder where the body’s immune system mistakenly attacks joint tissues. These conditions significantly impact the daily lives of those affected.
When you expose your skin to red and infrared light, a part of your cells called mitochondria, sometimes called the “power generators” of your cells, soak it up and make more energy. This interaction enhances cellular metabolism and the production of adenosine triphosphate (ATP), a molecule crucial for cell function. Additionally, red light therapy has been shown to reduce inflammation by modulating cytokine levels and promoting tissue repair processes. Numerous studies have demonstrated its positive impact on pain reduction, inflammation control, and improved joint function in individuals with arthritis.
Packing List
1 x Light Therapy Device
1 x Power Cord (Follow your country standard)
1 x Protection Goggles
1 x Tabletop Stand
Use Suggestion
Session:20-30 minutes for the same area in a session. It is better to start with a shorter session if you never use light therapy.
Frequency: 1-2 times a day for the same area treatment. Keep minimum 6 hours interval for the 2nd treatment for the same area.
Distance: Expose your skin and keep a distance at 6-24 inches from the device for best results.
Protect your eyes: Please wear goggles when enjoying the light therapy.
Tips: Drink some water before and during use.
NOT USE UNDER THESE CONDITIONS
Children under the age of 13, pregnancy and epilepsy, photo-allergy, and photosensitizing medications like lithium, melatonin, phenothiazine antipsychotics, and certain antibiotics.
People with a history of skin cancer, insensitive to heat, and systemic lupus erythematosus should also avoid this kind of treatment.
Besides, if you are currently taking steroids or cortisone injections, you should not receive light therapy.
Precautions
1. One treatment session for the same area should not exceed 30 minutes.
2. Turn off all power after finishing treatment, pull plugs off when not in use.
3. Do not use the device in the circumstances of hot, humid, dusty or have lampblack in the environment.
4. Keep your device away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.
5. Keep your device in a cool, dry, well-ventilated location without corrosive gas.
6. Prevent impact or violent vibration, move it gently.
7. Avoiding alcohol or corrosive solvent to clean all parts of the device.
Maintenance
Turn off the power of your device first, and then unplug the power cord. Then use a light damp, soft, lint-free cloth to clean exterior. Do not spray liquid directly.
3-Year Warranty
All panels of Infrared Red Light (IRL) purchased new from IRL directly or an authorized reseller are warranted for a period of three years from the date of shipment from the factory. IRL will be responsible for the faults of the products caused by the normal using during the warranty period, repair or replace the corresponding component found to be defective at no charge to the purchaser.
IRL shall not be liable for any faults or damage caused by misuse, accidental or intentional damage, force majeure, or the product has been modified.
Reviews
There are no reviews yet.