Product Specifications
Shell Material | Aluminum Alloy |
Voltage | 100-240V |
Power Consumption | 402W |
Product Size | 880 x 276 x 71mm (34.6 x 10.87 x 2.79in) |
Net Weight | 11.8kg |
LEDs | 300 * 3W |
Lens Beam Angle | 30 Degree |
Wavelengths | 630nm + 660nm + 810nm + 830nm + 850nm |
Irradiance | 156mW/cm² at 6 inches; 140mW/cm² at 12 inches; 132mW/cm² at 18 inches; 103mW/cm² at 24 inches. |
EMF | 0 μT @ 3 inches |
Timer (6 Levels) | 5 / 10 / 15 / 20 / 25 / 30 Minutes |
Dimmer (5 Levels) | 20% / 40% / 60% / 80% / 100% |
Pulse Frequency (6 Levels) | 10 / 40 / 73 / 146 / 293 / 587Hz |
Cooling Fan Quantity | 2 |
Life Span | 100,000 Hours |
Warranty | 3 Years |
Frame Design (Patent)
1. A well-knit and ultrathin aluminum alloy frame in an integrative molding method with a smooth cambered corner design looks more exquisite. Excellent thermal dissipation and outstanding oxidation resistance.
2. The whole shell is more smooth and even, preventing any hurt may be caused by sharp corners or bumpy screws.
3. The surface is frosted with strong scratch resistance.
4. A bespoke heat-resistant and dust- and splash-proof acrylic panel was applied to protect the lamps.
5.Anti-skid and anti-collision rubber feet at a height of 15mm for the bottom and 31mm for the rear provide better protection.
Cooling System Design (Patent)
Patented hydrodynamic heat dissipation technology ensures that the device stays at a moderate temperature during operation. Together with two mute built-in cooling fans and the design of cellular heat emission holes, air circulation and heat dissipation are effectively promoted.
The infrared red light therapy lamp can be used continuously for a longer period of time. Don’t worry about overheating, which will shorten its life or affect its performance.
Further Features
Irradiance and Coverage
Easy-to-use by Control Panel or Remote Control
After connecting the power and turning on the power switch on the lower back. You can click the buttons on the control panel or remote controller to set up the light, time, brightness and pulse frequency for light therapy.
Five-Waveband ( 3 more wavelengths for next level therapy)
1) 630nm red light was generated by 30 LEDs.
2) 660nm red light was generated by 120 LEDs.
3) 810nm NIR was generated by 15 LEDs.
4) 830nm NIR was generated by 30 LEDs.
5) 850nm NIR was generated by 105 LEDs.
Conveniently Use with Complimentary Door Hanging Kit
You can follow the video to mount your lamp on the door or wall.
Packing List
1 x Light Therapy Device
1 x Remote Controller
1 x Power Cord (Follow your country standard)
1 x Door Hanging Kit
1 x Protective Goggles
Note: Acrylic base and mobile stands can be ordered from “Accessories”.
Use Suggestion
Session:10-20 minutes for the same area in a session. It is better to start with a shorter session if you never use light therapy.
Frequency: 1-2 times a day for the same area treatment. Keep minimum 6 hours interval for the 2nd treatment for the same area.
Distance: Expose your skin and keep a distance at 6-24 inches from the device for best results.
Protect your eyes:Â Please wear goggles when enjoying the light therapy.
Tips: Drink some water before and during use.
NOT USE UNDER THESE CONDITIONS
Children under the age of 13, pregnancy and epilepsy, photo-allergy, and photosensitizing medications like lithium, melatonin, phenothiazine antipsychotics, and certain antibiotics.
People with a history of skin cancer, insensitive to heat, and systemic lupus erythematosus should also avoid this kind of treatment.
Besides, if you are currently taking steroids or cortisone injections, you should not receive light therapy.
Precautions
1. One treatment session for the same area should not exceed 30 minutes.
2. Turn off all power after finishing treatment, pull plugs off when not in use.
3. Do not use the device in the circumstances of hot, humid, dusty or have lampblack in the environment.
4. Keep your device away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.
5. Keep your device in a cool, dry, well-ventilated location without corrosive gas.
6. Prevent impact or violent vibration, move it gently.
7. Avoiding alcohol or corrosive solvent to clean all parts of the device.
Maintenance
Turn off the power of your device first, and then unplug the power cord. Then use a light damp, soft, lint-free cloth to clean exterior. Do not spray liquid directly.
3-Year Warranty
All panels of Infrared Red Light (IRL) purchased new from IRL directly or an authorized reseller are warranted for a period of three years from the date of shipment from the factory. IRL will be responsible for the faults of the products caused by the normal using during the warranty period, repair or replace the corresponding component found to be defective at no charge to the purchaser.
IRL shall not be liable for any faults or damage caused by misuse, accidental or intentional damage, force majeure, or the product has been modified.
Loupin (verified owner) –
It’s working!
So far, the Red & NIR panel have done only positive achievements for me. Before I bought the panel, I had severe diabetic peripheral neuropathy, every pain in the legs and the hands known in the medical science, I had them. It all began with a left femoral bypass and the amputation of a toe followed by a heart attack at the end of the surgery. Needless to say that I was in a bad shape. After to and a half month, at two sessions a day of Red & NIR therapy with the natural food medication pills suggested by “The Nerve Doctors”, I am on my way to a full tiny nerves recovery plus reduced inflammation in my left leg, sleep improved and energy gain I never could have conceived.
Thank you so much.
Louis P.
Trois-Rivieres, Canada