Video: Product display
|Shell Material||Aluminum Alloy|
|Product Size||322 x 216 x 71mm (12.67 x 8.5 x 2.79in)|
|LEDs||70pcs * 5W Dual chip|
|Lens Beam Angle||30 Degree|
|Wavelengths||660nm + 850nm|
|Irradiance||136mW/cm² at 6 inches;
125mW/cm² at 12 inches;
110mW/cm² at 18 inches;
92mW/cm² at 24 inches.
|EMF||0 µT @ 3 inches|
|Timer (6 Levels)||5 / 10 / 15 / 20 / 25 / 30 Minutes|
|Dimmer (5 Levels)||20% / 40% / 60% / 80% / 100%|
|Pulse Frequency (6 Levels)||10 / 40 / 73 / 146 / 293 / 587Hz|
|Cooling Fan Quantity||1|
|Life Span||100,000 Hours|
Housing Design (Patent)
1. Full aluminum alloy sheathing. Excellent thermal dissipation and outstanding oxidation resistance, not easy to change color than normal carbon steel material.
2. One-piece aluminum alloy frame, super thin but sturdy with rounded corner design, and all screws are at same height with the aluminum case. Whole smooth and flat, preventing any hurt may be caused by keen-edged corners or bumps.
3. The whole aluminum fabrication used a grit dose process to preserve it from scratch.
4. An special designed acrylic panel was attached to the front to protect the lamps. The panel is heat-resistant, dust-proof, and easy to replace if any breakage.
5. Anti-skid and anti-collision rubber feet are specially designed both in the bottom and rear for good protection.
Cooling System Design (Patent)
Our professional engineers focus on the design of the cooling system to maximize the usage duration and life of the device. They have been upgraded over 10 times by improving the internal structure and external heat dissipation method. In the end, they made it come true. Our devices keep a low temperature during the process of constant use. So our customers who need to use it to treat different areas or families can operate freely and continuously without having to take a break for cooling.
The internal cooling system integrated hydrodynamic heat dissipation technology, cooling fins and a silent cooling fan were installed in the device to boost the air circulation and heat dissipation. Furthermore, we adopt honeycomb heat dissipation holes for better cooling results.
It is peaceful to enjoy your light therapy and meditation at the same time.
Irradiance and Coverage
Easy-to-use by Control Panel or Remote Control
After connecting the power and turning on the power switch on the lower back. You can click the buttons on the control panel or remote controller to set up the light, time, brightness and pulse frequency for light therapy.
Dual-Chips for Two-waveband
Red and NIR lights are distributed more evenly.
One LED includes two chips, one for red light, one for infrared light. So 70 LEDs have 140 chips to emit light.
1) 660nm red light was emitted by 70 chips.
2) 850nm NIR was emitted by 70 chips.
1 x Light Therapy Device
1 x Remote Controller
1 x Power Cord (Follow your country standard)
1 x Protection Goggles
Note: Tabletop stand could be ordered from “Accessories”.
Session：10-20 minutes for the same area in a session. It is better to start with a shorter session if you never use light therapy.
Frequency: 1-2 times a day for the same area treatment. Keep minimum 6 hours interval for the 2nd treatment for the same area.
Distance: Expose your skin and keep a distance at 6-24 inches from the device for best results.
Protect your eyes: Please wear goggles when enjoying the light therapy.
Tips: Drink some water before and during use.
NOT USE UNDER THESE CONDITIONS
Children under the age of 13, pregnancy and epilepsy, photo-allergy, and photosensitizing medications like lithium, melatonin, phenothiazine antipsychotics, and certain antibiotics.
People with a history of skin cancer, insensitive to heat, and systemic lupus erythematosus should also avoid this kind of treatment.
Besides, if you are currently taking steroids or cortisone injections, you should not receive light therapy.
1. One treatment session for the same area should not exceed 30 minutes.
2. Turn off all power after finishing treatment, pull plugs off when not in use.
3. Do not use the device in the circumstances of hot, humid, dusty or have lampblack in the environment.
4. Keep your device away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.
5. Keep your device in a cool, dry, well-ventilated location without corrosive gas.
6. Prevent impact or violent vibration, move it gently.
7. Avoiding alcohol or corrosive solvent to clean all parts of the device.
Turn off the power of your device first, and then unplug the power cord. Then use a light damp, soft, lint-free cloth to clean exterior. Do not spray liquid directly.
All panels of Infrared Red Light (IRL) purchased new from IRL directly or an authorized reseller are warranted for a period of three years from the date of shipment from the factory. IRL will be responsible for the faults of the products caused by the normal using during the warranty period, repair or replace the corresponding component found to be defective at no charge to the purchaser.
IRL shall not be liable for any faults or damage caused by misuse, accidental or intentional damage, force majeure, or the product has been modified.